dub lx1 write firmware issue [Solved] (2024)

Welcome to Octoplus Huawei Software v.‪1.3.5‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:

Job ID: 000000000190A903
2024-11-25 09:03:31
Starting Write Firmware(Factory mode)
Selected phone model: ‪DUB-LX1‬
Selected download file: C:/Users/mnafm/Desktop/Board_firmwae_y7_2019_dub_by_Abo_wattan/DUB-AL00-BD_1.0.0.59_Download.xml
Selected rawprogram file: C:/Users/mnafm/Desktop/Board_firmwae_y7_2019_dub_by_Abo_wattan/bootloaderimage/rawprogram0.xml
Selected patch file: C:/Users/mnafm/Desktop/Board_firmwae_y7_2019_dub_by_Abo_wattan/bootloaderimage/patch0.xml
Selected firehose file: C:/Users/mnafm/Desktop/Board_firmwae_y7_2019_dub_by_Abo_wattan/bootloaderimage/prog_emmc_firehose.mbn
Selected Full flashing mode!
Warning: Please, before firmware write, disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Android-based devices). Dont run any other programs or attach new devices to your computer during the flashing procedure! Don’t turn off phone and don’t disconnect cable during firmware write. Please, follow these simple instructions to avoid phone damage
Searching Qualcomm HS-USB QDLoader 9008 port...
Please, reconnect battery, connect USB cable with attached Test Point on your phone!
Detected ‪Qualcomm HS-USB QDLoader 9008‬ port
Connecting to device...
Hadshaking...
Sending loader prog_emmc_firehose.mbn...
Loader send successfully
Reconnecting, please wait...
Configuring device...
Reading partition table...
Writing. Please wait...
Writing SBL1 partition...
Writing RPM partition...
Writing TZ partition...
Writing DEVCFG partition...
Writing EMMC_APPSBOOT partition...
Writing CMNLIB_30 partition...
Writing CMNLIB64_30 partition...
Writing KEYMASTER64 partition...
Writing GPT_MAIN0 partition...
Writing GPT_BACKUP0 partition...
Patching. Please wait...
Patch done successfully
Searching Fastboot devices...
Found android device: 56a89bb2
Detected ‪Android Sooner Single ADB Interface‬ port
Warning: Reading product model failed
Warning: oem get-build-number failed
Writing PARTITION partition...
Writing DSP partition...
Writing RAMDISK partition...
Writing KERNEL partition...
Writing CACHE partition...
Writing CMNLIB partition...
Writing CMNLIB64 partition...
Writing ABOOT partition...
Writing KEYMASTER partition...
Writing MODEM partition...
Writing PERSIST partition...
Writing RECOVERY_RAMDISK partition...
Writing RECOVERY_VENDOR partition...
Writing ERECOVERY_KERNEL partition...
Writing ERECOVERY_RAMDISK partition...
Writing ERECOVERY_VENDOR partition...
Writing RPM partition...
Writing SYSTEM partition...
Writing 1 chunk from 4...
Writing 2 chunk from 4...
Writing 3 chunk from 4...
Writing 4 chunk from 4...
Writing TZ partition...
Writing USERDATA partition...
Writing DEVCFG partition...
Writing FSG partition...
Writing MODEMST1 partition...
Writing MODEMST2 partition...
Writing OEMINFO partition...
Writing LOG partition...
Writing PRODUCT partition...
Writing VENDOR partition...
Writing VERSION partition...
Writing ODM partition...
Writing SBL1 partition...
Writing SEC partition...
Writing APDP partition...
Writing MSADP partition...
Note: After successful reflash the phone in Board Firmware mode, for a correct work of the device, you need to reflash it in Upgrade mode!
Write Firmware(Factory mode) done.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000190AB2E
2024-11-25 09:26:34
Starting Switch Fastboot to Update mode
Selected phone model: ‪DUB-LX1‬
Searching Fastboot devices...
Found android device: 58K6R19121002730
System: ‪System 8.2.0.036(05L4)‬
Initializing remote service connection...
Downloading resource...
Switching to Upgrade Mode...
Writing ERECOVERY files...
Successfully switched to update mode.
Switch Fastboot to Update mode done.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000208ABA4
2024-11-25 09:28:25
Starting Write Firmware(Upgrade mode)
Selected phone model: ‪DUB-LX1‬
Selected base update file: C:/Users/mnafm/Desktop/dload/update_sd/UPDATE.APP
Selected cust update file: C:/Users/mnafm/Desktop/dload/DUB-L21_hw_meafnaf/update_DUB-L21_hw_meafnaf.app
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪Android Adapter PCUI‬ port
Connecting to phone..
Write Firmware(Upgrade mode) failed.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000190AB78
2024-11-25 09:29:31
Starting Write Firmware(Upgrade mode)
Selected phone model: ‪DUB-LX1‬
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪Android Adapter PCUI‬ port
Connecting to phone..
Write Firmware(Upgrade mode) failed.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000208ABCD
2024-11-25 09:30:02
Starting Write Firmware(Upgrade mode)
Selected phone model: ‪DUB-LX1‬
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪Android Adapter PCUI‬ port
Connecting to phone..
Write Firmware(Upgrade mode) failed.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000208AC06
2024-11-25 09:32:48
Starting Switch Fastboot to Update mode
Selected phone model: ‪DUB-LX1‬
Searching Fastboot devices...
Found android device: 58K6R19121002730
System: ‪System 8.2.0.036(05L4)‬
Initializing remote service connection...
Switching to Upgrade Mode...
Writing ERECOVERY files...
Successfully switched to update mode.
Switch Fastboot to Update mode done.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000208AC0F
2024-11-25 09:33:12
Starting Write Firmware(Upgrade mode)
Selected phone model: ‪DUB-LX1‬
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪Android Adapter PCUI‬ port
Connecting to phone..
Write Firmware(Upgrade mode) failed.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000208AC19
2024-11-25 09:33:50
Starting Write Firmware(Upgrade mode)
Selected phone model: ‪DUB-LX1‬
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪Android Adapter PCUI‬ port
Connecting to phone..
Write Firmware(Upgrade mode) failed.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000190ABE7
2024-11-25 09:34:23
Starting Write Firmware(Upgrade mode)
Selected phone model: ‪DUB-LX1‬
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪Android Adapter PCUI‬ port
Connecting to phone..
Write Firmware(Upgrade mode) failed.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000190ABF2
2024-11-25 09:34:49
Starting Write Firmware(Upgrade mode)
Selected phone model: ‪DUB-LX1‬
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪Android Adapter PCUI‬ port
Connecting to phone..
Write Firmware(Upgrade mode) failed.
Performed by ‪1.3.5‬ Software version.

Job ID: 000000000208AC46
2024-11-25 09:35:52
Starting Write Firmware(Upgrade mode)
Selected phone model: ‪DUB-LX1‬
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
PACKAGE_TYPE: OFFLINE_UPDATE
AMSS_VERLIST : DUB-L22 8.2.0.172(C900)
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪Android Adapter PCUI‬ port
Connecting to phone..
Write Firmware(Upgrade mode) failed.
Performed by ‪1.3.5‬ Software version.

dub lx1 write firmware issue [Solved] (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Trent Wehner

Last Updated:

Views: 6334

Rating: 4.6 / 5 (56 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Trent Wehner

Birthday: 1993-03-14

Address: 872 Kevin Squares, New Codyville, AK 01785-0416

Phone: +18698800304764

Job: Senior Farming Developer

Hobby: Paintball, Calligraphy, Hunting, Flying disc, Lapidary, Rafting, Inline skating

Introduction: My name is Trent Wehner, I am a talented, brainy, zealous, light, funny, gleaming, attractive person who loves writing and wants to share my knowledge and understanding with you.